Duplo brick generator for curved down (arch inverted) bricks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version of Duplo brick generator, where you can generate curved down (arch inverted) bricks. Not 100% accurate
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Version of Duplo brick generator, where you can generate curved down (arch inverted) bricks. Not perfect 100% accurate representation - not all edges have bevel and inside of the brick (above bottom connector plate) is filled in.
When you download and run the openScad file, you can generate crazy large bricks which doesn't exist anywhere. Like big U ramp from two bricks. However the base connector plate (0.5 height) is always there.
You might need to do slight adjustments of basic parameters for your particular printer, print material and extruder.
There is a generated STL file for standart Arch inverted 2x3x2 (ID 2301) brick which is default in the generator.
And also STL for smaller standart Arch inverted 2x2x1.5 (ID 11169) brick
You are welcome to improve on it!