Small Electronics Box 50mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 428
- Wydruki
- 3
- Wyświetlenia
- 1594
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors.
Print instructions
Category: Organization Summary
This is a small 50mm by 50mm box, that can be mounted to the wall. I used it to house some WAGO connectors.
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: No
Resolution: 0.28
Infill: 10%
Filament: BASF PLA black
Notes:
Printed at 210, 65 for good adhesion. No supports needed.
Post-Printing
Why I designed this?
I needed a small box to hide some WAGOs on the wall. The box will fit a few WAGOs or other electronic components. It is wall mountable with hidden holes.
The lid can be fastened by M4 blots without nuts