Cyclone Seperator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cyclone separator made from 3D printed and machined parts. Easily change dimensions with the parametric fusion file
- Ocena
- 4,5 / 5
- Polubienia
- 126
- Pobrania
- 1347
- Wydruki
- 2
- Wyświetlenia
- 6381
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I made this cyclone separator. It consists of five parts, four of which were 3D printed. The last, the top piece, was made out of acrylic on my CNC router so I could see inside but it can also be 3d printed.
In my test it worked relatively well. It filters out most particles, even when tested with fine wood dust. It was designed with parameters so after opening the Fusion 360 file you can easily change the various dimensions.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament: PLA
Category: Machine Tools