1/4" socket to 3.2mm pin (for Dremel chuck) to spin Toroidal Fan/Propeller in Dremel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to spin the toroidal fan with 1/4" socket connector in a Dremel fitted with the little chuck.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 422
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
I printed https://www.printables.com/model/397690-toroidal-fan-attachment-4-workshop-cordless-screwd this toroidal fan, but after spinning it with a drill on fastest speed and being unimpressed with it, I thought it needs to spin faster. A Dremel spins up to around 10x faster than a cordless drill, so I quickly made this tiny thing to fit into the ¼" socket connector on the fan, and fit into the little chuck on my Dremel. The shaft is as big as it can be and still fit, it measures 3.2mm, and the square ¼ end is a nice snug push fit.