AA & AAA Honeycomb Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery holder for AA and AAA batteries with honeycomb pattern
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These models fits 50 AA or AAA batteries at the time, i will upload more models for AA & AAA batteries with the same design within shortly.
Holder V1 and V2 is about the same size and takes the same amount of material to print.
AA holder outside dimensions:
AA hole dimensions:
AA batteries may vary sligthly in diameter, so depending on your batteries aswell as your printers tolerances i recommend you print the test piece first to make sure that there is a bit of play between the battery and the hole. The diameter holes is 14,57mm which is about 0.35mm clearance.
