Twisted flower pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another flower pot. Geometry was created using a parametric model in Rhino/Grasshopper. The model is solid and is…
- Ocena
- 4,955 / 5
- Polubienia
- 760
- Pobrania
- 4503
- Wydruki
- 56
- Wyświetlenia
- 13 179
- Oceny
- 44
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Just another flower pot. Geometry was created using a parametric model in Rhino/Grasshopper. The model is solid and is intended to be printed in vase/spiral mode. Two versions are included: one is completely closed and the other one has a hole on the bottom.
Dimensions:
- diameter at the top: 116mm
- diameter at the bottom: 84mm
- height: 90mm.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2 mm / 0.3 mm
Infill:
no, use vase/spiral mode
Filament:
Notes:
Default settings with a 0.2/0.3mm layer height should work. Activate vase or spiral mode in your slicer. Supports are not needed.