Land Rover Freelander 1 Rear Light Guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Freelander 1 rear light guards clone. They closely resemble the original.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 241
- Wydruki
- 1
- Wyświetlenia
- 1666
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
For long-term sun exposure, print this model using PETG with a 0.2 layer height and 0.4 nozzle. The clippers tolerance were designed with this layer height in mind.
Print the following parts:
- 1 Rear Bottom Lights Guard 1
- 1 Rear Bottom Lights Guard 2
- 2 Clippers
- 2 Screw Mounts
- 2 Spacers (optional)
Note that I ended up not using the spacers, as I didn't see any advantage to using them, even though they were included in the original part. However, you have the option to add them if desired.
For the screw guides, use four M3x10 screws. I initially tried to include the screw guides as part of the model, but they proved to be too fragile and broke easily.