1 / 10
Miss Minutes and TVA logo Book Stands — zdjęcie 1
1 / 10

Miss Minutes and TVA logo Book Stands

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a project from scratch of the TVA logo and Miss Minutes from the Loki series. These are two decorative book…

Ocena
5 / 5
Polubienia
53
Pobrania
122
Wydruki
1
Wyświetlenia
924
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

I made a project from scratch of the TVA logo and Miss Minutes from the Loki series. These are two decorative book holders.

I made them 2cm thick. There is a vertical support that can be integrated into a book so that you can no longer see it.

It's a little flimsy at the rods, but I used PLA maybe a sturdier filament would be stronger. But since it's decorative, it's more than enough for us.

It is a multi-layered project, made in such a way that the colors can be changed.


I printed the whole thing in 0.2 speed mode with Prusa Slicer at 12% infill, around 4:40 for MissMinutes and 3:50 for TVA

Print Settings

Printer Brand:

Prusa

Printer:

Infill:

12%

Filament:

Filaments.ca PLA

Orange, white and black


Notes:

Brim is needed because th rods may suffer from warping, it happened to my prototype, 'cause I didn't put the brim the first time.

Category: Decor

Tagi