Ankermake M5 Capricorn/PTFE cutting tool by spiggytech
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a specialized tool to help you cut PTFE tubing for the AnkerMake M5 OEM throat
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 293
- Wydruki
- 3
- Wyświetlenia
- 1526
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello Everyone,
This is a small tool for cutting PTFE for the AnkerMake M5. Proper PTFE length is a way to prevent filament blowouts that can break your printer.
I've purposefully made the channel length longer than your standard PTFE throat.
The reason for this is every machine seem to be a bit different. With the proper measurement and cut, you will have a the perfect fitting PTFE for your machine. Use instructions found here on the Unofficial M5 Wiki
You will need the following:
- PTFE Tube
- Snap Knife
- M5 Hot End Service Tool Block
- Crescent wrench or 6mm wrench for removing the hot end
Print suggestion: PLA+ minimum, 30% infill @ 0.20mm layer
The sample in the images is Inland PETG+, 30% gyroid infill @ 0.20mm layer, Archimedean top layer. Color swap is done by eyeballing the print because AnkerMake has not implemented color change yet.
If you're wondering why this tool is no longer packaged with the AnkerMake M5 Hot End Tool Block. I've decided to put this tool into it's own dedicated page so it is easier to find. Also makes things easier if any troubleshooting is needed.
As always, please let me know if there's any way to make this tool better for you! I can be reached here, reddit (/u/spiggytech) or on the AnkerMake Community Discord.