Bambu Lab - Proper pooping place (outhouse)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
P1P, X1, and X1 Carbon needed a proper outhouse to take care of the poopin's as they do on the regular. So, here it is.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 102
- Wydruki
- 2
- Wyświetlenia
- 1948
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a quick and dirty outhouse I whipped up for the Bambu printers. Now yours too can do its dirty deeds in a proper poopin place. I hope you like it.
The holes on the back are for the 6mm x 1.7mm neodymium magnets that work so well to mount this pooper where it belongs.
******* v2 * updated model with 1mm deeper mounting lip and a slight overhang off the front roof *******
******* v3 * updated model with tear drop magnet holes for a perfect no fuss fit and many minor improvements to reduce waste and improve printability *******
PLA Matte
15% infill
No supports
Filament: 39.18 g
Print time: 2h55m