Aerogarden Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small plug meant to fill empty slots in an Aerogarden.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 174
- Wydruki
- 6
- Wyświetlenia
- 1251
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I made this Aerogarden “plug” to use if you don't have plants for all of the holes in your Aerogarden, but want to keep plants in other slots. In my case, I had a plant die and didn't have anything fill the hole with.
I printed this in black PETG and it worked well. You'll want to use a dark color as part of the purpose of not having an open hole is to prevent algea growth in the hydroponic reservoir from the nutrient bath being exposed to the growth light. PLA would probably be fine; but keep in mind one side of this will be exposed to a very moist environment.