Shuttle DH270 - 2RU Half Rack - Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2RU Rack mount for a Shuttle DH270.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 2RU Rack mount for a Shuttle DH270. It is printed as a half rack mount so the other half can be used for mounting other equipment. I have included 1RU blanking plates for the other side. Both sides can be joined using M5 bolts and nuts.
I have printed in PLA as there is not much heat in the part of my cabinet where this is mounted, but you may want to print in PETG depending on the location. I printed the part with the front face down on the bed and no supports where needed.
This can also be used for many of the other Shuttle mini PCs as a lot of them share the same dimensions.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30%
Filament: esun PLA black
Category: Computer