Kohaku Insert (original run acrylic tiles + sundial expansions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kohaku Insert for the original run acrylic tiles, the sundial expansion, and the hidden objectives expansion.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
"Kohaku one piece" file is for those with a big enough print bed to print the model all in one piece. The original box interior is about 10 inches x 10 inches, the insert is a bit undersized.
If your printer is not big enough, you can print it in four pieces using the 4 “Kohaku piece x” files.
The image is of the 4 part version, you can see where it is split up.
The box is not that tall, so it does not fit the cards on their side, so the card slots are angled to fit. There is one card slot for the sundial cards, one of the hidden objective cards, and one for the player aids from the base game.
The spacer files are the silver pieces shown in the image, they are for separating the 3 and 4 player fish from the other fish if you want to, or just to take up the extra space for a more snug fit.
If you can fit it on your print bed, printing it in one piece will save on filament, as it won't need to make the walls around the extra perimeters of the 4 separate pieces. It works fine printed as separate pieces as well, they slide around a little as I made it a little undersized to make sure it would fit in the box, you can glue them together if you like, but it is not necessary.
I printed it with 0.3 mm layer heights and lightning infill to keep the filament usage as small as I could.