Dremel Jointer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Jointing table for your dremel. It takes 1mm of your part at a maximum width of 35mm. I added a dustcollection port on the back for 35mm vacuum hoses. It prints without supports and for the assembly you only need 3x M5x7 screws. Turn your dremel up to atleast 20k rpm so it can nicely remove the material. Hardest i tested since is solid wood at full width and max rpm (35k) and i have to say i was surprised that it could do it. The bit its designed for is the Dremel 561. The pictures show the v1 and v2 is just some optical upgrades.
ENABLE IRONING!!! I did not and my table is not as smooth as it would need to. If you like to you can also wax your table.
I am still working on a clamping spot as well as a support block for the more popular dremel Models as i noticed the tabel falls on its back if you put your dremel in.
Updates will come this weekend (18th of Febuary 2023)
UPDATED New Clamping spots and engraved batches. Dust collection and rounded edges for better stability and build in elephantsfoot-compensation.