Budmen Rubber Band Face Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the Budmen face shield to be smaller and use rubber bands instead of elastic bands due to rubber bands being…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Modified the Budmen face shield to be smaller and use rubber bands instead of elastic bands due to rubber bands being much easier to acquire. Also changed the plexiglass attachment points and added slits to make the sheets easier to put on/take off. The print takes 1h 6m 15s at 100% speed with 10% infill and 0.3mm layer height.
face-shield_v8: Original version
face-shield v12: Made attachment points more robust and modified hooks slightly.
face-shield v14: Made the attachment points more robust (again)
Original face shield design and assembly instructions available at budmen.com.
Print instructions
Category: Other Summary
Modified the Budmen face shield to be smaller and use rubber bands instead of elastic bands due to rubber bands being much easier to acquire. Also changed the plexiglass attachment points and added slits to make the sheets easier to put on/take off. The print takes 1h 6m 15s at 100% speed with 10% infill and 0.3mm layer height.
face-shield_v8: Original version
face-shield v12: Made attachment points more robust and modified hooks slightly.
face-shield v14: Made the attachment points more robust (again)
Original face shield design and assembly instructions available at budmen.com.
Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.3 mm
Infill: 10%
Filament: Any PLA
Notes:
Printed with 2 perimeters at 120% speed.