Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The output is tangential to the coil which allows the filament to unwind much more naturally than with the original outp
- Ocena
- 4,917 / 5
- Polubienia
- 153
- Pobrania
- 914
- Wydruki
- 13
- Wyświetlenia
- 5366
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The output is tangential to the coil which allows the filament to unwind much more naturally than with the original output.
It is necessary to glue the part with a heat resistant double sided adhesive, this avoids screwing the part and weakening the cover of the device (it is of course possible to glue this part directly with glue).
It is also necessary to slightly ovalize the original outlet so that the PTFE tube can pass at the right angle.
NB : the thread for the pneumatic connector is M10