Face Shield w/ Integrated Straplock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of the Budmen face mask printed with an integrated strap lock for an elastic band (as opposed to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A modified version of the Budmen face mask printed with an integrated strap lock for an elastic band (as opposed to just holes for the band) on the headband. It removes the need for a separate strap lock piece and makes the assembly simpler without a significant increase in print time (on my settings).
Original design and assembly guide located at budmen.com. This design already has an integrated strap lock, so that file isn't needed.
Print instructions
Category: Other Summary
A modified version of the Budmen face mask printed with an integrated strap lock for an elastic band (as opposed to just holes for the band) on the headband. It removes the need for a separate strap lock piece and makes the assembly simpler without a significant increase in print time (on my settings).
Original design and assembly guide located at budmen.com. This design already has an integrated strap lock, so that file isn't needed.
Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.3 mm
Infill: 10%
Filament: Any PLA, ABS Any
Notes:
Printed with 2 perimeters at ~200% speed (I did a lot of tinkering in settings, so I'm not entirely sure). Print time is currently 40 minutes with my settings, though I'm cutting it down by a few minutes every print just by speeding up the printer.