1 / 2
The Rise Of the Shield Hero Shield Key Chan — zdjęcie 1
1 / 2

The Rise Of the Shield Hero Shield Key Chan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Keychain was designed after the sheld used by Naofumi Iwatani in the light novel, anime, and manga "The Rising Of…

Ocena
0 / 5
Polubienia
46
Pobrania
175
Wydruki
0
Wyświetlenia
1087
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This Keychain was designed after the sheld used by Naofumi Iwatani in the light novel, anime, and manga "The Rising Of The Shield Hero". I used a reference image I found online to do my best to accurately portray it. the images of what I made had a 3D printed one with no additions (besides the bead) to the right and the one to the left is the one I put on my bag that I put aluminum tap on to give it some shine. the bead I used is just some green paper with some superglue bubbled on top and hardened with
accelerator from a hobby shop near home. the bead is just under 7mm in diameter.

I used Fusion 360 to design the accessory. my drawings for the design are a bit sloppy but I've added the file for the Fusion 360 design if you wanted to make changes to it.

Print instructions

Category: Accessories Summary

you can print this in two parts and put them together or if you have the capability to print it as one part. I recommend printing with the back to the print bed. I found if you print it as two parts you won't need glue. the detail fits snuggly into the main shield

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Yes

Supports: Doesn't Matter

Resolution: 1.5

Infill: 5%

Tagi