SEB kitchenaid machine security lid repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The security of the lid was broken and couldn't be glued. So I designed and 3D printed a part to replace it
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend of mine has a SEB Multi Robot kitchen machine with the security on the lid was broken. No way to glue it and no way to use machine anymore without bypassing the security which is dangerous
The kitchen machine is an old model (30 years old more or less) and parts are difficult to find at the low price. So to save his machine and allow him to eat again grated carrot salads again I designed and 3D printed a part that is glued on the lid and replace the defective part
Design was done using Fusion 360 after measuring broken part and mainly the security part profile
I then printed one prototype to check that part will fit to the cover and can activate the security. I had to change the initial model to get the definitive part
The part was printed using transparent PLA with 0.20mm layer height and standard PrusaSlicer parameters. I used support for in a small area of the part
Part is then glued on the lid using CA glue and the security works again properly
We can now safely use the robot and prepare good food
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d file so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post also nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs