1 / 4
Dyson V7, V8 and V10 adapter to Roborock S7 dustbin — zdjęcie 1
1 / 4

Dyson V7, V8 and V10 adapter to Roborock S7 dustbin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a quick and dirty remix of the Dyson V7, V8, and V10 adapters for the Roborock S7 dustbin

Ocena
5 / 5
Polubienia
30
Pobrania
133
Wydruki
1
Wyświetlenia
1928
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a quick and dirty remix of the Dyson V7, V8, and V10 adapter to the Roborock S7 dustbin.

 

Instructions for printing:
 

To print this, I used the PrusaSlicer Alpha3 to create organic supports from the build plate only.

It easily came off in one piece without tuning, which is a godsend!

 

If you don't have a prusa slicer, you can use another type of tree support in Cura or bamboo slicer.

Material:

PETG is recommended but not required, ABS and PLA can also be used.

Note:

The top part of the bin is rotated 180 degrees in the image, but it is fixed in the currently uploaded model so you don't have to turn the bin upside down to vacuum it. Since the first one I printed worked I did not bother printing it again, post your makes! :)

Remix sources:

Tagi