Prusa Enclosure PSU holder (v1 Black PSU holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to mount my PSU outside the IKEA LACK enclosure and make it easily removable when needed.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 491
- Wydruki
- 8
- Wyświetlenia
- 3968
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
While I was doing my Ikea Lack table base enclosure for my Prusa i3 MK3s I wanted to mount my PSU outside the enclosure.
But the originally designed PSU holder wasn't suiting my PSU unit.
So I remixed the orignal parts.
Assembly
- Mount the upper part to the PSU.
- Mount the bottom part to the table, use PSU as reference.
- Slide the PSU and secure it with the screw to the bottom of the tabletop.
Assembly video
Building the enclosure video
The original Prusa guide
https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/
Printing Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 30%
Filament: Fiberlogy PETG Black
Use 3 perimeters - same settings as for printing the printer parts.
Caution
The render is a bit confusing I had to forgot that there are switch and wire on the one side of the PSU (thanks to @milfordoj for pointing that out).
Remarks
For switching the printer I am using an electric extension cord with switch mounted to the bottom of the table on the side.