1 / 1
Shimano R8000 Chainring Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cap is to prevent the chain jamming between the FC and BB on bikes with large Bottom Bracket Outer Shells
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This cap is designed to fit on the inside of the smaller chainring of a Shimano Ultegra R8000 crankset. The cap is to prevent the chain from wedging itself between the small chainring and the BB on frames that have a large BB outer shell such as the Look 795 Series.
The cap clips on the inner chainring, no mounting hardware or glue required.
Make sure to verify clearance on your particular model. Use Chain Catcher Cap PR1 file to check for fitting and tolerance.
- Mk3: Revised one clip to accommodate chainring alignment notch. Added obligatory photo of make for prusa upload. NOW WITH VRAY RAYTRACE IN FULL RTX RENDER OMGZZZ!!!11!!!!1!
- Mk2: Revised size of clips
- Mk1: First Prototype