Kobra Go ABL custom height gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted less adjusting after auto bed levelling and decided to do a bunch of math and testing to create this ABL sensor…
- Ocena
- 4,5 / 5
- Polubienia
- 12
- Pobrania
- 209
- Wydruki
- 2
- Wyświetlenia
- 1287
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted less adjusting after auto bed levelling and decided to do a bunch of math and testing to create this ABL sensor gauge.
For my Kobra Go having my ABL sensor 3.44mm above the nozzle tip gets me bang on nearly every time for z level.
Please test at YOUR OWN RISK! I assume no responsibility for anything that might go wrong. This ABL offset brings the nozzle very close to the bed and all printers are different, so it might not work for yours and could potentially damage something.
When testing please watch that your nozzle doesn't contact the bed while auto levelling. The nozzle will get very close but should never actually touch. Please have your hand on the power switch while testing just in case.
Please leave a comment after your test to let me know your findings, Hopefully this will help many other Kobra Go owners to get the Z level just right for printing after auto bed levelling.
Category: 3D Printer Accessories