Gridfinity Magnetic Bit Holder 0.25in
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of 4mm magnetic bit holder with sizing up to 7mm to allow 0.25in bits
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I liked the 4mm magnetic bit holder a lot, as I don't have to handle tiny magnets and I can make this fit all my hundreds of bits really easily. I have mostly 1/4in bits, so this is sized to allow that.
Repeating text from Rob Ludwick:
This is a (7)mm magnetic bit holder with a gridfinity form, holding (52) bits in a 2x2 gridfinity configuration.
The base is meant to hold these 3M magnets.
Original:
https://www.amazon.com/dp/B07GQQBZS3
One that ships faster for me:
https://www.amazon.com/gp/product/B0B6FQM8KK
Print the base and the insert.
Then insert 16 20x20x2mm magnets in the bottom of the base.
Place the insert on top of the magnets in the base apply superglue along the sides to hold it in place.
The magnets should be strong enough to hold the bits in place (even when turned upside down!), but not strong enough to magnetize the bits.