Delta Faucet Cartridge Bonnet nut 1 5/16in socket 3/8in drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Could not find a 1 5/16in socket at the local hardware store, so I printed one in PETG 100% infill.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I was replacing the Delta faucet cartridge for our single handle kitchen sink and the instructions specified a 1-5/16 six point socket. I tried to buy one at Lowes and Home Depot stores locally, but they did not have that size. I then used Freecad to draw one up to print out.
The bonnet nut / valve cartridge system is dependent on torque to create and maintain an adequate seal over time. We recommend a torque wrench with a 1-5/16 six point socket or adjustable wrench to tighten. The adequate tightening torque is 70-100 in-lbs.
Printed in PETG at 100% infill. 3/8in drive is the torque wrench I had that supported the 70-100 in-lbs spec.