USB powered LED Wi-Fi Clock (8USD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for a Wi-Fi Clock I found online.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 28 Feb 2023: Saw a better deal and updated the affiliate link.
*****
Finally found a low cost USB powered LED clock that will sync time off the internet via Wi-Fi! But didn't have a case/holder.
So I designed a simple snap on holder to tilt it 15 degrees and make it more stable.
Please read through description below about the Wi-Fi clock before proceeding to print.
Firmware on the clock is for time zone GMT+8 hours, if you like a different time zone, you will need to flash a different firmware. I have not tried that as the current time zone is perfect for me.
I find the original firmware has a security flaw as anyone can assess it through the Wi-Fi SSID and know your home Wi-Fi password. My workaround is to put some conductive tape over the Wi-Fi antenna to weaken the Wi-Fi signal. In its original state, the signal strength is already quite weak but will likely still penetrate through one wall.
Firmware available on Github. (Proceed at own risk)
https://github.com/maarten-pennings/303WIFILC01
Sorry I lied, price is lower than 8USD =) (if you purchase on AliExpress)
*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s
Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)
AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DmpFxU1
*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j
For Amazon affiliate links
https://wp.me/peMLu6-2C