Centrifuge problem spinner, 12 slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by Numberphile's video on centrifuge problem https://www.youtube.com/watch?v=7DHE8RnsCQ8 In short, this is a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Inspired by Numberphile's video on centrifuge problem https://www.youtube.com/watch?v=7DHE8RnsCQ8 In short, this is a visualization tool on how to balance 12 slot centrifuge, especially for the case of 5 and 7 test tubes(in this case nuts).
You will need:
-1x 608 bearing
-12x M8 nuts, with edge to edge diameter of 12.8mm, preferably nyloc
Problem with nuts is their wide tolerances. According to ANSI standard, their edge to edge diameter is 12.73-13mm, that's the difference between falling out and not fitting at all. Either find ones that are close enough to 12.8mm, or you can modify f3d file(use parameters table).
Category: Math Art