Smallrig Grip for Sony a6400 for larger lenses.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed Handgrip for Smallrig CCS2310 2310 cage. Tested with Sony a6400, may work with 6100 and 6300, but I haven't…
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 279
- Wydruki
- 1
- Wyświetlenia
- 2643
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
[EDIT 13.5.2024] added new model for even larger lenses and fingers.
3d printed Handgrip for Smallrig CCS2310 2310 cage. Tested with Sony a6400, may work with 6100 and 6300, but I haven't tested. Won't fit a6500.
This is V2 version of https://www.printables.com/model/401025-smallrig-ergonomic-grip-for-sony-a6400 This one is designed to be used with larger lenses. There are also few smaller improvements, like smaller and more precisely placed screw holes.
Print upside down, like shown in picture, I strongly suggest using Cura's Fuzzy skin option.
You will need 2x m3x10mm and 2x washers ~1mm thick and 6mm or less outer diameter
You can also go with 2x m3x8mm without washers, but I don't recommend that option.
Print Settings
Printer:
CTC Bizer
Rafts:
No
Supports:
Yes
Resolution:
0.12mm
Infill:
high
Filament:
Bronze composite
Notes:
The one in photos is printed with settings:
-Nozzle 0.4mm
-Line Width 0.45mm
-Fuzzy Skin Thickness: 0.4mm
-Fuzzy Skin Point Distance 0.2mm
Category: Camera