Dan Wesson 715 Scatter Shell and Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[edit 14.9] removed preview file that didn't render. It seems like only small files can be rendered on thingiverse and…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
[edit 14.9] removed preview file that didn't render. It seems like only small files can be rendered on thingiverse and I can't make clip small enough.
Scatter shell for Dan Wesson 715, it holds 5 bb's and shoot all at once. Shell SHOULD work for baseline Dan Wesson. Clip works only for 715, I have tried clip on base model and it didn't fit. Friendly reminder, should doesn't necessary mean will.
This is my attempt to circumvent thin wall printing problem associated with shells. I also tried to make it somewhat look like a real .357 cartridge. Living_Dead's shell design works well for a single BB, but for 5 BB's in one it leaked way too much and lead to extremely low muzzle velocity. My longer shell remix fixed that. I also like idea of a moonclip.
I may release single BB version in the future, but as for now you can use source files to make them yourself.
Print Settings
Notes:
I would strongly suggest printing upper part in 0.1mm, lower part(bellow bb tube) can be printed in 0.2mm.
Post-Printing
After printing make sure BB's fit and that your revolver cycles perfectly. If chamber doesn't fully align with the barrel, start sanding base(the surface that touched building plate).
Category: Sport & Outdoors