Accessory Rails for Fusion 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
STANAG 2324(Picatinny) and 4694(NATO ) accessory rails. There are very slight differences in rails, they are cross…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 523
- Wydruki
- 0
- Wyświetlenia
- 1993
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
STANAG 2324(Picatinny) and 4694(NATO ) accessory rails. There are very slight differences in rails, they are cross compatible. I added Picatinny rail, because I wanted to see how much or little they differ, and now you can check it too!
This is meant to be resource for Fusion 360, to modify parameters go solid->modify->change parameters. STL files are mostly for the show.
Models are middle of tolerances, except in few occasions where limit is beneficial for 3d printing.
[edit] added Fusion 360 file for picatinny,aka. MIL-STD-1913, STANAG 2324 and documentation. Also found proper dimensions for NATO rail in good quality https://grabcad.com/library/picatinny-nato-rail-1
Category: Sport & Outdoors