PBS-1 Airsoft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PBS-1 style suppressor slightly modified to print easier, also had to bypass my machine and software limitations…
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 555
- Wydruki
- 1
- Wyświetlenia
- 3231
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
PBS-1 style suppressor slightly modified to print easier, also had to bypass my machine and software limitations
[update 29.6.2022] Released V2 versions of tops, they feature much tighter knurling, same scale as on the base. Deleted obsolete files.
[update 16.5.2021] Released V2 versions of bases, it has a lot thicker walls and at front it has 8.6mm hole, in case you need to stabilize your inner barrel. In V2 14mm thread was made with different software, it's a bit tighter. 24mm threads are the same as in original.
If your machine isn't 100% accurately calibrated follow these steps:
Step_1 Print thread_test threadtestV2(for V2 14mm) or thread+24mm and make sure it fits your thread, scale if needed.
Step_2 Scale base and top part according your thread test and print Base part
Step_3 print top part
Step_4 ?????
Step_5 profit
Print Settings
Printer:
CTC Bizer, replicator clone
Rafts:
No
Supports:
No
Resolution:
0.15 for better knurling
Category: Sport & Outdoors