Out Of Marbles Twist Lift Scaled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I redesigned the Twist Lift Base to fit the upscaled size. Its requires no supports and no gluing.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 1638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I redesigned the Twist Lift Base to fit the upscaled size. Its requires no supports and no gluing.
Parts are designed to be printed on a MK3 size bed. Hardware listed below. Use Mr Fibble's Triple Twist upscaled files.
1x Motor - https://www.amazon.com/gp/product/B0728HDH45
2x bearings - https://www.amazon.com/gp/product/B00ZVBREP2
1x Switch - https://www.amazon.com/gp/product/B07XC5KB8D
5x M5x10 bolts - 6x M3x10 Bolts
I'm using these for marbles, Anything lighter and they tend to fly off the track on the triple twist. https://www.amazon.com/gp/product/B09F2WCWJX
The motor is slowed down by using a 5v 1a power source. possible to run off USB power block.
Printing Notes:
I used 10% infill with 25% modifiers around the screw holes and for the towers.
