Drawer lock - child safety
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawerlock out of PLA and TPU for child safety
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 182
- Wydruki
- 2
- Wyświetlenia
- 2688
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Edit 16.09.2023:
Added v2 of the Stripholder so the lid is actual functional, it now has one large pin to fix the strip. Corresponding strip added as well in 200mm version.
######
Made this when my daughter learned to walk and suddenly all the drawers were accessable to her and we ran out of locks. Didn't want to buy new ones so I printed what I needed.
It proofed functional, altough only for a short while, she figured out how to open the simple mechanism quite fast.
The strip is supposed to be printed in TPU, there is a 100mm and a 200mm Version of it. It's glued into the holer with super glue.
I mounted the lock with strong double sided tape.