Milwaukee Rotary Tool Packout Organization Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foam and 3D Printed parts to organize all your Milwaukee rotary accessories
- Ocena
- 4,667 / 5
- Polubienia
- 452
- Pobrania
- 1832
- Wydruki
- 4
- Wyświetlenia
- 21 965
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Lots of files! You'll most likely want to print something similar to this:
- 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top)
- 1× Intermediate-Bin (This goes on the bottom)
Various bit holders:
- 4× Milwaukee_case_Dremel_bit_holders_V5 (You may want to try the 3.2mm version - these are slightly smaller holes for a tighter fit)
- 2× Milwaukee_case_Dremel_21mm_disc_holders
- 2× Milwaukee_case_Dremel_25mm_disc_holders
- 2× Milwaukee_case_Dremel_33mm_disc_holders
- 2× NEW - 39mm disc (Fits 1.5" cutoff discs)
- 2× Milwaukee_case_Dremel_sanding_drum_holders_V4
And to go inside the tall container that comes with the packout:
- 1× Milwaukee_Stacking_Bin_V2 (Choice of dividers)
- 1× Bottom_Cup_Single_Divider (Choice of dividers)
This is for a 5-bin packout box (48-22-8435 Milwaukee PACKOUT Compact Organizer)
You'll need a piece of Kaizen foam like this: (Red sandwich 57mm thick)
Polymaker Matte PLA Filament 1.75mm Army Red is a good color match
Many thanks to Benjamen Johnson for the designs!
This label / handle fits the packout: https://www.printables.com/model/408217-milwaukee-packout-compact-organizer-handle-labelin
I haven't printed it, but this looks like an interesting layout option: https://www.thingiverse.com/thing:5778856