Blade-Fuseholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blade-Fuse-Housings for Blade receptacles Car Blade Fuses For automotive electrical applications up to 33 Volt
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Blade-Fuse-Housings for Blade receptacles Car Blade Fuses For automotive or motorcycle electrical applications up to 33 Volt.
Printed with PETG. ABS or Nylon may work as well but not PLA because it's not elastic and heat resistant enough.
Type 1:
1-way for blade receptacles with plastic insulation up to a wire cross-section of 2.5 mm2 and flat receptacles without insulation DIN 46340 T1-T4 with or without latching tongue up to 4 mm2.
Type 2:
1-way for blade receptacles with plastic insulation up to a Wire cross-section of 2.5 mm2 and flat receptacles without insulation DIN 46340 T1-T4 without latching tongue up to 4 mm2.
With screw terminal M5
Type 3:
1-way for blade receptacles without insulation DIN 46340 T1-T4 with locking latch up to 6 mm2.
Type 4:
1-way for blade receptacles without insulation DIN 46340 T1-T4 with locking latch up to 6 mm2.
With screw terminal M5
Type 5:
2-way for blade receptacles without insulation DIN 46340 T1-T4 with locking latch up to 6 mm2.
With screw terminal M5
Type 6:
6-way for blade receptacles without insulation DIN 46340 T1-T4 with locking latch up to 6 mm2.
With 2 screw terminals M5, 60 mm distance