Teeny tiny little 2:1 epoxy resin mixer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a way to mix a little pouring resin I had and came up with this
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 521
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Been using pouring epoxy resin to cover PLA+ printed armour and helmets and stuff, was making a few small things that I wanted to coat in resin to be able to clean them easily and came up with this solution.
No idea how many mils it is, I just wanted to be able to make a small amount, its enough to coat a few small things at a time then wait for them to cure, sand and then coat another aspect of them and repeat until you have a nice sealed print that can be cleaned.
The tools are small enough to throw away or you can pour the resin out and use them again a couple of times.