204x60 air vent cover - honeycomb and net
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airvent cover with honeycomb "grille" and embedded 3x3 net to prevent insects from entering through it.
- Ocena
- 4,333 / 5
- Polubienia
- 79
- Pobrania
- 617
- Wydruki
- 2
- Wyświetlenia
- 3495
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Tried to create something that can be used outdoor. Honeycomb structure is intended to stop raindrops and additional grid should prevent insects from entering throuch holes or nesting in honeycomb.
Internal 3x3 net is separated from honeycomb by 0.5 spaces to create stronger, “real” grid.
Cura settings:
layer height, initial layer height: 0.2
wall, top, bottom thickness: 1.6
Supports: no
Combing mode: all
Maximum resolution: 0.5 (or less - keeps grid structure separated from honeycomb).
Infill: doesn't matter
Rotate upside down when printing. :-)
Filament: Fiberology Easy PET-G Graphite