RC2014 Pro Backplane case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case not only makes it look nicer, but makes it easier (together with my RC2014 module cases) to insert modules.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
RC2014 Backplane Pro Case
“RC2014 is a simple 8 bit Z80 based modular computer originally built to run Microsoft BASIC. It is inspired by the home built computers of the late 70s and computer revolution of the early 80s.” - source: https://rc2014.co.uk
The backplane is a PCB that allows modules to interconnect together. This case not only makes it look nicer, but makes it easier (together with my RC2014 module cases: https://www.printables.com/model/401904-rc2014-module-cases ) to insert modules (see my other designs).
Like it? Please click the like button and leave me some stars after printing !
Features
- Fits as a glove
- Led window
- Slot covers to cover unused slots
Assembling
- Use 12-15mm M3 screws with conical heads (with allen socket cap) to mount the top and bottom part together
- Print some slot covers to cover unused slots
- Drill the hole for the LED with a 4mm drill
- Print the 'LED window' with transparent filament and insert it in the hole (from the inside). Extend the LED with a cable and glue it in place
- Alternatively use hot-glue: place a piece of tape at the outside, apply hotglue and use a screwdriver to push it in from the inside. Remove the tape when cooled down.
References
- RC2014 is a trademark of RFC2795 Ltd.
- https://z80kits.com/shop/backplane-pro/