Phrozen Cure Beam Holder (Easy Print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for a Phrozen Cure Beam unit and the two torches
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to mount my Phrozen Cure Beam unit to the square hole pegboard on my bench so whipped this up. Made the peg holes then decided it was easier to ziptie it anyway, but i also included a couple of countersunk holes for anyone wanting to screw it to a wall or bench.
The recess in the center is to use velcro tape to make it easily removable if needed, but depending on your printers dimensional accuracy, it may fit snug anyway. The photos of my print are from the first version which i have since tweaked the bases of the torch holders.
Designed to be easy to print with no supports. If you would like a particular edit, let me know!