Piranha Panic Marble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My attempt at a replacemant marble for Piranha Panic. Needs raft and some support with this, had a few issues keeping…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
My attempt at a replacemant marble for Piranha Panic.
Needs raft and some support with this, had a few issues keeping it fixed to the glass bed.
Bed at 56'C (printer is in a cold garage)
Speed @ down to 30 mm/s
Temp 200'C
3 shells
3 layers
needs a lil clean up on the marble base, working to find a way around this (suggestions welcome)
Please let me know if you require any further info on the settings I used.
Print Settings
Printer:
Ender 3X
Rafts:
Yes
Supports:
Yes
Resolution:
0.1
Infill:
25%
Filament:
Technologyoutlet.co.uk PLAGreen
Category: 3D Printing