Minimalist chopsticks holders (3 variants)

I created this model, and its variants, for the "Chopsticks Holders" contest hosted here on Printables. I've started with a simple shape (rectangular parallelepiped) where I removed a bit from the top using another simple shape (flattened cylinder) and worked from there. Afterwhat I created two variants, for a total of three, for you to choose from :

1. Flat: the shape in its original (most basic) form, you can print it really easily even with a low infill percentage
2. Feet: those little feet add some cuteness to the shape :)
3. Pillar: can be used on either four sides (you want to print it standing, it might take you a couple more minutes to print but doesn't requires any support)

Each of them have a volume of 10*10*30mm. It works great for me and the chopsticks I've tried, but you can scale them in your slicer directly if needed.

Instructions

The STLs files should be in the proper orientation for you to slice directly.
No support required on any of the variants.

You can hide the seam in the sharpest corner (front left for example).

It can be printed in regular 0.2mm.
But if you want to go for a cleaner look here are some settings for example:

• Layer height: 0.16mm (or even 0.12mm)
• Monotonic Top/Bottom order: activated
• Top/Bottom line direction: [90, 0]
• Enable Ironing: activated (optional)
• Extra Skin Wall Count: 0

If you struggle to make the “pillar” version stick to your build plate feel free to add a brim and/or print slower for this one, it should still be an easy print.