Ziplock Bag Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple model to support a drying ziplock bag after washing
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
We reuse Ziplock bags and wash them out, drying on a radiator prooved to be inconsistent as the bags would close and remain wet or dry super slowly.
Initialy the design was just a loop to hold the bottom of the bag spread out but the open end still closed up so I added the “branch” on the side.
I did have issues with the leg with the branch wobbling too much so I used the supports to hold that leg steady. Until I did this I trashed a few prints.
I did the first version in PLA but it went out of shape prety pronto (rookie error) but the PETG vesions have worked perfectly. Every day is a school day!
Printer : Prusa MK3S+
Filament : eSUN PETG
Nozzle : 0.4
Layer : 0.3