Springed feet raiser for ender 3 and alike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet raiser for 40x40 aluminum extrusions. Utilises default Ender 3 bed springs. Height: 47-60mm (weight dependent)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I designed spring loaded raiser feet for my ender 3 v2. Mainly because I didn't found any…
It utilises default bed springs many people have left unused after swapping them for the stiffer ones.
I've printed mine in ABS since I print it quite often. PETG and PLA should be fine too, just make sure it suits working temperatures around your printer and it's not a clearly brittle one.
I used 0.4 nozzle, 0.2 layer height, 3 perimeters, 6 layers for top and bottom, a brim and supports off the buildplate. Top piece is printed standing upside down to make less mess around the pin.
Assembly is simple: remove the parts from the buildplate, take off the supports, brim and strings you may have, insert the spring on the pin in the centre of the top part, push the bottom part in and you're ready to install it on your printer. All that left is to push it in the extrusion and you're ready to go!