Clasp for a Topmodel Jewellery Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very niche project which became extremely important when my daughter broke the clasp on her Topmodel jewellery box
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution
So this fun little project became extremely important when my daughter broke the clasp on her topmodel jewellery box. Dad to the rescue with a little CAD design and some intelligent slicing. It saved us a bunch of money not having to throw the box in the bin.
I removed the old clasp by drilling out the four rivets and took the necessary measurements in order to make a new 3D model.
This means that in order to fasten the new printed model you will need 4 pcs of M3x6 screws and matching nuts.
The model needs strength in the loop and therefore it has to be printed on the side. See pictures.
I printed it with a 0.4mm nozzle with 0.2mm resolution, 100% infill and with supports enabled (painted on the loop).
First I tried it with a PLA glitter filament, but it was too brittle, so I switched to some standard white PLA which worked like a charm.
Hope it works for you too. :)