PTFE Reverse Bowden 3mm to 2mm i.d. (6mm to 4mm o.d. )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of adapters between 2/4mm PTFE tube and 3/6mm PTFE tube to be used in reverse bowden.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I use a long reverse bowden between my ERCF MMU unit and extruder. 2.5mm wasn't stiff enough and would bend, making the filament grind inside the tube.
This uses the Voron style PTFE ECAS04 PTFE adapter for the smalller end and two M3 screws on the thicker PTFE tube.
The Reduction is to be placed near the extruder and can work with 2.0 to 2.5 i.d. as it has a chamfer inside the middle that leads the filament in to the smaller PTFE tube.
The Enlarger is a pass through just for holding the tubes because a smaller 2/4mm tube actually fits inside a 3/6 PTFE tube and