Meterstab-Halterung / Holder for Folding Carpenters Ruler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
it holds your Meterstab on the Werkzeugwand
- Ocena
- 4,5 / 5
- Polubienia
- 11
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 426
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I saw another model (https://www.printables.com/model/400968-wall-holder-for-carpenters-ruler) which gave me the idea for this, but I found it too bulky and it also needed a lot of filament for what it is.
So I designed this from scratch, uses just 18g of Filament and prints in around 50 minutes with a 0,6 nozzle. If you use the 0,6 nozzle the 2 perimeters will be just fine to fill the whole wall thickness. PLA seems sufficiently strong.
Inside measurement is 38*18mm as this was the biggest Meterstab I found in my arsenal, at 70mm overall lenght. There is also a hole in the bottom to let most of the dust from the workshop fall through…