Thread Spool Pin and Holder for Singer Slant-o-Matic Sewing Machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,06 € – 0,07 € netto (bez VAT)
Dla pliku: My washer for M8(x4)_v1.2_0.15mm_PLA_MK3S_4m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,07 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 3,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Thread Spool Pin and Pin Holder for Singer 431G, as well as for other Singer series 300, 400 and 500 Sewing Machines.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 2618
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Updated to ver. 2.0:
- The spool pin, added hollow hole to reinforce rigidity of it.
- The washer inner dia increased to 9 mm.
On one of my Singer 431G sewing machines, spool pins are cut and glued by help of glue gun. The already original polyamide spool pins was even more shorter and it was very ugly done.
The famous Singer 431G is one of the best sewing machines Singer ever made. This model (as well as 401G.., 411G) was the last models they made with all metal gears inside. ‘G’ is for Germany, where it was made. There are corresponding US versions like 431A… These models is also known as Slant-o-Matic.
The original designed spool pins are quite short for todays standard. I decided to design my own solution: pin and holder. Original holder is fitted onto the machine by help of Push-On Retaining Locking Washer. As many “service man” was missing this detail, they usually used to glue the pins on the plate, as a quick and cheap solution.
My pin holder is fitted by help of printed M8 nut and washer. The pin itself may be printed or cut from a M5 screw. The printed pin is aprox 46 mm long plus threaded part. You can cut a screw in the same way as I am showing on my pictures. I have used a stainless steel screw, where I cut off head and screw thread is shortened. The metal pins may be purchased on Aliexpress too.
In my humble opinion, the best version is with metal pins, but printed pins are good enough.
A perfectionst may say, it is not as original design. The original design is qute weak and short for todays thread spools. If you are missing original pins, you can install my design. The original sewing machine is not at all damaged with this solution. You can always replace it with original design when you find it.
My other details for the same machine is here and here.
Consider to convert pin holder to Horisontal thread post.