ORANGE PI ONE PLUS PROCASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A well-designed Orande pi One Plus case where everything fits perfectly and leaves all ports free with good cooling.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 457
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A well-designed Orande pi One Plus case where everything fits perfectly and leaves all ports free while protecting the device from bumps and dirt.
Every detail has been thought out when designing this housing, for example the LED that is too powerful has been given a diffuser.
The design is delivered with two upper parts, in one we can use heatsinks for CPU and Ram Memory, and in the other we have a grid with which you obtain a cooling equal to that obtained when you use the plate without a housing.
The bottom part is machined to perfectly house the Pi and 4 M2 screws that thread on the top.
Print in PETG preferably although it could be printed in PLA without problems, with precision and without supports, it is designed to be printed easily.
For the version with heatsinks, you will need a 24x22.5mm heatsink and two additional 11x11mm ram and power chip, one of them has to be filed 1mm on one side.