Decoder Mount etc. for LGB Mogul Steam Loco
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily add a decoder to your LGB Mogul steam loco
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 651
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom add-on parts for the LGB Mogul steam loco to install an ESU 5L LokSound decoder as well as a speaker.
The holder
My goal was to keep the loco in its original state as much as possible, i.e. the built in electronics remain in place (just disconnected). The holder is easy to mount on the existing cooling plate. It holds the decoder and all the necessary pins for the wiring.
When using metal screws, please ensure no contact is possible to any electronic parts.
The tender parts
My tender was already prepared for the installation of a 70mm speaker, but without sound openings in the chassis. Therefore a drilling template was needed to have an idea where to place the holes.
Having the speaker added, the weight block doesn't fit anymore to its original place, therefore I also added spacer sleeves to lift the weight above the speaker (2 pieces required).
My tender is also prepared for a switch and volume control. As I have no use for such, I added optional parts to close the corresponding holes in the chassis.
Happy LGBing