Small Dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small, single perimeter dish that uses just 0.5m of plastic. It is watertight and can be scaled to fit any need.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 212
- Wydruki
- 2
- Wyświetlenia
- 706
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
This is a small dish I designed to use up some of the last meters on my filament spools, instead of buying disposable cups. I have a gecko that eats fruit slurry and these little dishes are perfect for serving his food on.
I print them out of PETG at 0.3mm layer height with a 0.6mm nozzle, I would advise not printing in vase mode as the slight fillet on the bottom edge helps maintain a good seal to prevent leaks. As long as you have a good first layer quality and a decent line overlap, the model is watertight and can hold about a tablespoon and a half of liquid. Additionally the model was designed to be scalable and still be printed in a single perimeter and single base layer, no matter the size.